- Set the tape so that it will be played back
from the very beginning of the recorded
Data (where you hear the Pilot tone).
- Set the MEMORY PROTECT switch on
the rear panel of the Juno-60 to OFF.
- Set the tape recorder to PLAY (play mode),
then press the LOAD button (8) of the Juno-60.
- The LOAD indicator button will light up and the
Program Number Display window becomes blank, showing
that loading the Data has started.
* Be sure to press the LOAD button before the Modulated tone is heard.
- If the LOAD indicator goes out and the
Program Number Display window shows double dashes (- -),
the Loading is completed.
* If you wish to stop Loading in the middle,
press the MANUAL button (4).
- When the Loading is completed, set the MEMORY PROTECT
switch to ON and stop the tape recorder.
If there is an error...
Carefully repeat the Load procedure.
Be sure to set the play back level of the tape
recorder to an appropriate level and press
the LOAD button at the right moment.
|